穿刺线夹

Piercing connector, simple installation, need not strip the cable coat.

关键词:

穿刺线夹

所属分类:

邮箱:

产品详细

General of insulation piercing connector (IPC)
1.Piercing connector, simple installation, need not strip the cable coat.
2.Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
3.Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector.
4.Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al.
5.Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001.
6.Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV.
7.Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/

Performance testing
1.Mechanical performance: the grip force of the wire clamp is 1/10 bigger than the break force of the lead, It comply with GB2314-1997.
2.Temperature rise performance: under the condition of big current, the temperature rise of connector is less than that of connection lead.
3.Heat circle performance: conforms to GB/T2317.3-2000, the heat circle trial standard for electric fitting.
4.Waterproof insulation performance: conforms to the relevant testing requirements in Part 2 of GB/T13140.4-1998.
5.Resistance to corrosion performance: under the condition of SO2 and salt fog, it can do three times of fourteen days circle testing.
6.Environmental aging performance: under the circumstance of ultraviolet, radiation, dry and moist, expose it with change of temperature and heat impulse for six weeks.
7.Fire-proof performance: insulation material of the connector withstands glowing filament test. Conform to the requirements in Chapter 4-10 of GB/T5169.4.

相关产品

路灯支架

Light Pole is a necessary product for many areas. We will customize the light pole that based on client’s requirement.

钢脚

Spindle/ insulator pin can be divided into lead head spindle, nylon head and steel head spindle.

吊环栓

Eye bolts have threads on one end and an eye on the other end. These bolts are used for a variety of hanging and variable tension applications. Eye bolts can be used for permanent fastening in side-to-side applications or in overhead applications to suspend weights.

挂板拉环

Thimble clevis used in dead-end applications to attach loop type dead ends to tongue or eye type fittings. It is a common hardware for powerline and transmission line system. They can be forging or casting, based on different types.

挂板螺母

Clevis nut is a common hardware for powerline and transmission line system. We have many types of clevis nut.

抱箍

Bracket is a common hardware for powerline and transmission line system. They have many different types, such as transformer bracket, mounting bracket, terminator bracket, arrester bracket, recloser bracket, secondary bracket, cutout bracket, service dead-end bracket and post insulator bracket.